Price lists
| Respray of Steel and Aluminium Frames | |
|---|---|
| Frame and forks in plain or metallic enamel | £250.00 |
| Frame and forks in flamboyant, pearl or fluorescent enamel | £300.00 |
| Frame only in plain or metallic enamel | £245.00 |
| Frame only in flamboyant, pearl or fluorescent enamel | £295.00 |
| Forks only in plain or metallic enamel | £100.00 |
| Forks only in flamboyant, pearl or fluorescent enamel | £125.00 |
| Brompton Frameset | £375.00 |
| Moulton modern space frameset | £375.00 |
| Moulton vintage ''F'' type frameset | £350.00 |
| Suspension ATB main frame & one piece swinging arm in plain or metallic | £285.00 |
| Suspension ATB main frame & two piece swinging arm in plain or metallic | £325.00 |
| Suspension ATB main frame & one piece arm & seat tower (or linkage plates) in plain or metallic | £350.00 |
| Tandem frame and forks in plain or metallic enamel | £450.00 |
| Tandem frame and forks in flamboyant or pearl | £550.00 |
| Tricycle frame & fork in plain or metallic enamel | £450.00 |
| Masking of carbon seat stays ( usually found on aluminium frames ) | £95.00 |
| Extra charge for carbon fibre fork ( when re-sprayed with steel or aluminium frame ) | £95.00 |
Prices for enamelling include blasting, priming and clear lacquer for steel frames
| Primer filling of rust pitting (usually found on older steel framesets, this is required to achieve a good finish of the resprayed frameset) | |
|---|---|
| Filling of light rust pitting where found on some tubes | £60.00 |
| Filling of light rust pitting all over frameset | £100.00 |
| Filling of medium rust pitting all over frameset | £150.00 |
| Filling of heavy rust pitting all over frameset | £200.00 |
| Respray of Carbon Fibre Frames (PLEASE CONTACT US BEFORE SENDING OR BRINGING IN FRAME) | |
|---|---|
| Carbon Frame and Forks Single Colour From | £550.00 |
| Carbon Frame Only From | £500.00 |
| Carbon Frame and Forks Additional Colour From | £200.00 |
| Carbon Fork Single Colour From | £180.00 |
| Carbon Fork Additional Colour From | £95.00 |
| Panels in colours and stencilling | POA |
All carbon resprays start with a sympathetic surface preparation, this is acheived by hand to create a smooth and even surface. Following the preparation all paint work is applied & dried using an air drying process.
| Miscellaneous items | |
|---|---|
| Shot blast only frame and forks only | £120.00 |
| Handlebars in plain or metallic enamel | £65.00 |
| Extensions in plain or metallic enamel | £65.00 |
| Mudguards (pair) in plain or metallic enamel | £175.00 |
| Chain guard (fully enclosed type) in plain or metallic enamel | £130.00 |
| Overspray ( faded and blended in finish) | |
|---|---|
| One extra colour | £95.00 |
| Two extra colours | £130.00 |
| Three extra colours | £160.00 |
| Contrasts | |
|---|---|
| Contrast panel on seat tube, down tube or top tube | £60.00 |
| Contrast panel on head tube | £60.00 |
| Lining | |
|---|---|
| Lug lining, from: | £85.00 |
| Box lining single boxes | £220.00 |
| Box lining double boxes | £275.00 |
| Personnel name on top tube (10mm high, brush script) | £15.00 |
| Transfers - Call for current prices plus fitting charge below | |
|---|---|
| Solo frame - self adhesive, non lacquer type | £45.00 |
| Solo frame - spirit or self adhesive & lacquer over | £45.00 |
| Solo frame - varnish fix & lacquer over | £65.00 |
| Reproduction transfers are possible | POA |
| Waterslide transfer fitting | £65.00 |
| Chrome plating - includes masking | |
|---|---|
| Front and rear ends | £325.00 |
| Forks all over | £215.00 |
| Front ends, rear ends and chain stay | £385.00 |
| Six inch of front forks and rear stays (includes ends) | £400.00 |
| Head lugs (pair) | £300.00 |
| Fork crown | £150.00 |
| Rear triangle (complete) | £450.00 |
| Three quarters of rear triangle | £375.00 |
| Masking chrome | |
|---|---|
| Mask and save chrome crown | £50.00 |
| Mask and save chrome front ends | £45.00 |
| Mask and save chrome rear ends | £50.00 |
| Mask and save chrome front ends and 6 inch | £60.00 |
| Mask and save chrome rear ends and 6 inch | £70.00 |
| Mask and save chrome head lugs, each from: | £75.00 |
| Mask and save chrome complete rear triangle | £100.00 |
| Mask and save chrome three quarter triangle | £100.00 |
| Mask and save chrome rear ends and right hand chain stay | £100.00 |
| Mask and save chrome front and rear end faces | £100.00 |
| Mask and save chrome front mech plate | £55.00 |
All tube repairs include the use or Reynolds 725 tubing. Other tubing at extra cost
| Equipment removal and fitting | |
|---|---|
| Fit new headset (new headsets can be supplied at current prices) | £40.00 |
| Fit new bottom bracket (new brackets can be supplied at current prices) | £40.00 |
| Strip , clean and refit headset or bottom bracket | £40.00 |
| Remove head & fork races only | £15.00 |
| Remove and refit headset races | £30.00 |
| Remove bottom bracket cup only from: | £15.00 |
| Remove headset or bottom bracket unit only | £25.00 |
| Remove adjusters only from: | £12.00 |
| Remove and refit adjusters | £20.00 |
| Strip, service, clean parts & re-assemble cycle from: | £225.00 |
| Remove and refit head badge (rivet on type) | £20.00 |
| Remove head badge and fill holes | £30.00 |
| Remove and refit plastic bottom bracket guide | £12.00 |
| Supply and fit plastic bottom bracket guide | £25.00 |
| Removal of stuck seat pin or handlebar extension, from: | £80.00 |
| Remove rivetted on Front Mech plate, re bond and re rivet (Usually found on carbon frames) | £80.00 |
| Remove rivetted or welded down tube gear stop adjusters, stops or guides and fit new (usually on alloy or carbon frames) | £30.00 per item. |
All tube repairs include the use or Reynolds 725 tubing. Other tubing at extra cost
| Frame repairs - To supply & fit new: | |
|---|---|
| Bottom bracket shell and bridge | £250.00 |
| Top tube | £200.00 |
| Down tube | £200.00 |
| Seat tube | £220.00 |
| Head tube and lugs | £250.00 |
| Top tube, down tube, head tube and lugs (new front triangle) | £450.00 |
| Single seat stay | £175.00 |
| Single chain stay & bridge | £175.00 |
| Pair of seat stays including bridge | £275.00 |
| Pair of chain stays including bridge | £275.00 |
| Chain stays, seat stays, rear bridges & dropouts (new rear triangle) | £450.00 |
| Stainless steel rear dropouts (available in; Track, horizontal & vertical designs) | £250.00 |
| Single rear dropout | £150.00 |
| Drop forged front dropouts | £150.00 |
| New pair of forks: Stainless dropouts, cast fork crown & 531 fork blades | £350.00 |
| Fork blades including stainless dropouts | £250.00 |
| Fork column; threaded or thread less (standard or A-head) | £125.00 |
| Dent filled where possible- per dent from: | £15.00 |
All tube repairs include the use or Reynolds 725 tubing. Other tubing at extra cost
| Braze on parts - To supply & fit new: | |
|---|---|
| Cantilever studs, per brake (pair) | £60.00 |
| Cantilever bridge on seat stay, including adjuster | £50.00 |
| Cantilever boss, including removal of old (per stud) | £60.00 |
| Cable stop, cable guide, zip tie guide, pump peg or mudguard eye (per item) | £16.00 |
| Gear hanger | £60.00 |
| Bottle bosses including stainless bolts (braze-on or rivet-in type) | £35.00 |
| Lever boss (per boss) | £25.00 |
| Allen key seat clamp boss, including stainless steel binder bolt | £75.00 |
| Rack eyes for Blackburn carrier, front or rear (4 point fixing) | £75.00 |
| Front mech braze on plate (specify large chaining size, Shimano or Campag double or triple) | £75.00 |
| Gear tunnel on or under bottom bracket | £25.00 |
| Lamp boss (rack eye type) usually on R/H fork blade, including stainless bolt | £20.00 |
| Fit dynamo or torque arm plate, Please supply dynamo/hub for fitting position | £60.00 |
| Removal charge for braze on fitting, includes cleaning tube after fitting removed | £16.00 |
| Brake bridge, including removal of old bridge | £75.00 |
| Chain stay bridge, including removal of old bridge | £75.00 |
| Ream and sleeve bottom bracket (thread replacement both sides) | £130.00 |
| Labour to fit disc mount plate, plate NOT included, steel frames only. Rotor, hub and operational calliper required | £125.00 |
| Brace tube across seat stay and chainstay | £35.00 |
| Cost of Disc mount plate | £25.00 |
| Drill for Allen key brakes front and rear | £35.00 |
| Repair of rivet on front mech plate (usually found on carbon frames, plus new parts at retail cost) | £80.00 |
| Tracking of Frame and Fork | |
|---|---|
| Re-track frame and forks. Full track including wheel check and gear hanger | £75.00 |
| Re-track frame only. Full track including wheel check and gear hanger | £60.00 |
| Alter rear dropout spacing including wheel check and gear hanger | £60.00 |
| Straighten and track front forks | £75.00 |
| Thread repairs | |
|---|---|
| Ream and sleeve bottom bracket (thread replacement both sides) | £130.00 |
| Ream and sleeve gear hanger | £65.00 |
| Heli Coil of stripped thread (if possible) from | £60.00 |
| Chainset pedal thread Heli Coil (if possible) | £75.00 |
| Thread down fork column, per 25mm | £55.00 |
| Riv- Nut replacement (usually bottle bosses) | £80.00 |
If you require any help pricing your renovation or any further information on work that is not listed, please contact us for advice.
For information on getting your frame to us see this page.
All prices include VAT @ 20%
E.&O.E We reserve the right to alter any specification and prices without prior notice.
Please note any work not collected 3 months from completion will be sold to recover our costs.
Prices for enamelling include shot blasting, priming and clear lacquer. Our repair prices are the same for all makes of frames.
Headset and Bottom bracket units should be removed if possible. No responsibility can be taken for fittings damaged or lost, which are left with the frame. All tube repairs include the use of Reynolds 725 tubing. Other tubing extra cost.
We reserve the right to charge for unforeseen work that is involved to complete the work to our standard and quality. These charges will be based on the time taken to complete the work.
All repair work and spray work has a warranty of one year.
Minimum repair charge £50.00. There is a charge of £50.00 for mixing paint that is not standard from our chart. (we regret that no guarantee can be made with colour matches). We cannot guarantee the quality of finish of other maker’s transfers when fitted and lacquered over.